The GNExCP6A/GNExCP6B manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. All types are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards.
| Option: | Code: | Description: |
|---|---|---|
| Type: | GNExCP6A-BGGNExCP6B-BG | A type – No end of line devicesB type – choice of end of line devices |
| Switch type: | S D |
S: SPCO D: DPCO |
| Stopping plug: |
N B S P |
N: Nylon B: Brass S: Stainless Steel P: Nickel Plated |
| Terminals: | S D |
S: Standard 6 x 4mm² D: DIN Rail 8 x 2.5mm² |
| Duty label: | N P S |
N: No duty label P: Metalised Polyester S: Stainless Steel |
| Colour: | RD, BL, GN, YW, RW, YB, BK |
RD: Red BL: Blue GN: Green YW: Yellow RW: Red/White YB: Yellow/Black BK: Black |
| Voltage: | 48V, 24V 12V, 6V |
System voltage |
| E.O.L. Module: |
ExxxR ED1 ExxxZ |
Resistor value in Ohms e.g. E470R = 470 Ohm Diode IN4007 = ED1 Zener diode e.g. E5V1Z = 5.1V |
| Series Module: |
SxxxR SD1 SxxxZ LED |
Resistor value in Ohms e.g. S1K5R = 1.5K Ohm Diode IN4007 = SD1 Zener diode e.g. S5V1Z = 5.1V LED = LED indicator |
Made in the UK
| IP rating: | 66 |
| Suitable for: | Hazardous area |
| Approvals: | ATEX, CE, IECEx |
