Description
Quality, reliability, ease of use and feature rich are attributes that are consistent across the entire range of Haes fire alarm control panels. As the entry level panel from Haes, the Eclipse encompasses all of these attributes to provide a panel that meets a variety of needs. For the fire alarm engineer the Eclipse has been designed to minimise labour costs. There is ample room for wiring, changing batteries and clear indication. Activation is via key switch or access code, which means you should always be able to work on the panel and the one man walk tests will help reduce the cost of maintaining the fire alarm system. Simplicity was one of the most important aspects when considering the end user of a fire alarm panel. The colour coded buttons and the 3 step silence functionality gives non-technical people the confidence to correctly manage their fire alarm system. The Eclipse is the only entry level panel on the market that will reduce false alarms. The Eclipse can be programmed so that it requires a secondary confirmation before sending the panel into alarm. Fire and Rescue services are looking to this type of functionality to allow them to respond to Alarm Receiving Centres. Two or four fire zone circuits are provided plus two monitored sounder circuits. Fire and Fault VFCO relays, Fire and Fault switched negative outputs, class change and an alert input are also included. The fire zone outputs can be set as ‘Twin Wire’ by DIL switch selection. In ‘Twin Wire’ configuration, special detector bases and call points must be used. Eclipse panels are approved to European standards EN54-2 and 4, Fire Detection and Alarm Systems – Control and Indicating Equipment
Made in the UK
